The 264 TEC LaserMount was designed for high-power devices needing active temperature control. With its large heat sink and integrated fan, the 264 can handle high thermal loads and broad temperature ranges.

High Power 9W4 Connector

The 264-BB-9W4 comes with a high-power 9W4 laser connector designed for up to 20A operation. This connector is compatible with the 1228-20 cable and our high-power laser drivers, such as the 4320, which use the 9W4 output connector.

Bread Board Cold Plate

Using a breadboard hole pattern found on optical tables, the 264M-BB-9W4 provides a grid of threaded metric (M2.5) holes for maximum flexibility in mounting your thermal load. Be it a laser device, optic platform, or other application, the breadboard configuration gives you excellent long-term flexibility in how to mount your loads.

Active Cooling

The 264 TEC LaserMount was designed for high-power devices needing active temperature control. With its large heat sink and integrated fan, the 264 can handle high thermal loads and broad temperature ranges.

Thermistor Control

The 264 uses a 10K thermistor for temperature feedback. More details on working with thermistors can be found here.

High Temperature Option

The 260 Series mounts are available in an optional high-temperature configuration, allows for operation up to 150°C, while retaining the temperature range and thermal capacity of the standard mount. Because thermistors do not perform well at high temperatures, the sensor is replaced with a high accuracy Pt 100 RTD sensor. There is an additional cost for the high-temperature configuration, please contact the factory for a quote.

Device Cover

Beyond the mount itself, the 264 works with our optional device cover:

The 260-C cover enhances the stability of the laser by minimizing the impact of ambient air currents.

Input connectors

Temperature Control

General