244 HHL LaserMount

At-a-Glance.

  • HHL packages
  • 0.5°C/W passive cooling efficiency
  • Integrated fan
  • Solder-less connections

 

$595.00

Contact Factory for Lead Time

The 244 HHL LaserMount was designed for high-power HHL devices, providing excellent heat sinking and easy electrical connection. The electrical socket comes pre-wired for standard HHL pin-outs, so the mount can be up and running in minutes.

The 244 also has an integrated fan for excellent thermal performance. When using the fixture with a 5300 Series TECSource, the 5300 has a built-in power supply for the fan, or a 2.3mm DC power jack on the side of the mount can be used (a suitable one is available in the accessories list).

The 244 is a post-mounted fixture. A pedestal is included with the mount, but can be removed. ¼-20 and M4 threaded holes on the bottom of the mount can be used with alternate post mounts.

DB-9 & DB-15 Interfaces

The laser driver and temperature controller connections are made through a DB-9 LDD and a DB-15 TEC connector on the back of the mount, which allows for quick connections to any Arroyo Instruments controllers.

Other Products in this Series