Call Us (888) 768-9912 Toll Free

4302 LaserSource, 2A

$1,495
US List Price* How to Buy
4302 LaserSource, 2A

The 4302 LaserSource offers the highest accuracy and lowest noise rating in the 4300 LaserSource family. Intended for use with higher power pump modules and other devices needing up to 2A of current.

High Compliance
The 4302 features a high 15V compliance for higher voltage applications, such as LED testing or quantum cascade lasers (QCLs), as well as excellent performance with lower voltage laser diodes.

Simple User Interface
The 4302’s user interface is remarkably simple… so easy to use, you’ll have it up and running in no time. Unlike other instruments which rely on 7-segment LED displays and a confusing array of indicators and buttons, the 4302 instead presents information on a high contrast VFD display in an easy-to-read format. The 4302 displays current, voltage, and photodiode current simultaneously… no need to toggle though the readings as you would on most instruments. Settings and error messages are in clear English, not cryptic codes and flashing status lights.

Optional Quasi-CW (QCW) Mode
The 4302 offers an optional QCW mode (see the 4302-QCW model), a feature not found in most other laser drivers in this price range. Many applications require the low duty cycle, high current pulses that QCW offers to manage thermal loading on the device. With rise times of less than 20µs, and pulse widths as narrow as 100µs, the 4302-QCW offers an effective and low-cost QCW solution.

At-a-Glance
  • 2A range
  • 15V compliance
  • 0.1mA resolution
  • <20uA noise
  • USB and RS-232 interfaces

 

 

 

 

Standard Computer Interfaces
The 4302 includes both USB and RS232 computer interfaces, allowing for quick and easy connection to a PC for remote operation. In addition, the LaserSource’s command set is compatible with ILX and Newport controllers, allowing you to leverage any existing software you may have already developed.
                                    USB & RS232 Connectors.gif

Ground Loops Eliminated
Like all LaserSources, the 4302 includes isolated inputs and outputs. In technical terms, this means that every input and output signal is electrically isolated, so that offset voltages, ground connections, and AC noise will not “bleed” into other parts of the electronics. Even the photodiode input is fully isolated from the laser output, ensuring full isolation of the laser output. In practical terms, this means it’s impossible to create a ground loop through the LaserSource, a common problem in laboratory setups where several different instruments are used in the same test. No other driver on the market has this capability.

Analog Modulation
The 4302’s analog interface supports modulation rates up to 65kHz.

Specifications

    

CW Mode Specifications

    LASER CURRENT
    Range (mA)

0 – 2000

    Resolution (mA)

0.1

    Accuracy (±[% reading+mA])

0.05% + 0.4

    Stability (ppm, time)

< 10, 1 hour

    Temperature Coeff (ppm/°C)

50

    Noise/Ripple (μA rms, low BW)

< 20

    Transients (μA)

< 300

    Compliance Voltage (V)

15

    Modulation Bandwidth (kHz)

65

    Modulation Input Range

0 – 10V, 10kΩ

    PHOTODIODE CURRENT
    Range (μA)

25 – 20000

    Resolution (μA)

1

    Accuracy (±[% set+μA])

0.05% + 2

    Stability (ppm, time)

< 200, 24 hours

    Temperature Coeff (ppm/°C)

< 200

    PD Bias (V)

0 to -5V, software programmable

    LASER VOLTAGE
    Range (V)

0 – 15

    Resolution (V)

0.001

    Setpoint Accuracy (±[% set+V])

0.05% + 0.005

    Measurement Accuracy (±[% reading+V])

0.05% + 0.004

    

LIMITS

    Current Limit Accuracy (mA)

20

    Voltage Limit Accuracy (±% FS)

2.5%

    

GENERAL

    Display Type

2x20 VFD

    Laser Connector

DB-9, female

    Photodiode/Interlock

On LDD connector

    Computer Interface

USB 2.0 Full Speed (Type B),
RS-232 (DB-9, male)

    Input Power

100V / 120V / 230V, 50 / 60Hz

    Size (H x W x D) [inches (mm)]

3.47 (89) x 8.5 (215) x 12 (305)

    Operating Temperature

+10°C to +40°C

    Storage Temperature

-20°C to +60°C

News

Photonics West Logo
Come see us at Photoics West 2018, North Hall, Booth 4247, January 30 through February 1

685 ComboPak available!

The 685 ComboPak, which integrates a high performance diode driver and temperature controller in a compact enclosure is now shipping! Read more...

More News...