Call Us (888) 768-9912 Toll Free

234 TEC TO-Can LaserMount

$595
US List Price* How to Buy
234 TEC TO-Can LaserMount

Designed for High Power
The 234 was designed with high power TO-cans in mind... with a maximum laser current of 3A, support for the new 2-pin high power TO-can devices, and capable of handling 10W thermal loads while still maintaining 25°C, the 234 can handle even the most powerful TO-cans you can throw at it.

The 234 is designed for post-mounting (post-mount not included), with 8-32 and M4 threaded holes on the bottom of the mount.

CAGE Support
The 234 cover includes mounting holes for 30mm CAGE systems available from Thorlabs, Linos, and others. For applications that require a 1" lens tube interface, the 234-C-02 cover plate may purchased separately.

At-a-Glance
  • 10W thermal capacity at 25°C
  • Up to 3A laser current
  • Supports 2-pin TO-can lasers
  • Operation down to -5°C
  • No wiring required

No Wiring
The 234 requires no wiring to configure it for your device. Instead, there are switches to configure the mount to the wiring of your device. The 234 supports all standard TO-5.6 and TO-9 devices, including high power 2-pin TO-cans.

Supports 2-pin High Power Devices
In addition to being a high power mount, the 234 natively supports the newer 2-pin high power TO cans, which operate at up to 3A and can disspate as much as 8 to 10W of heat. The 234 is the only mount on the market that can handle these high power lasers.

DB-9 & DB-15 Interfaces
The laser driver and temperature controller connections are made through a DB-9 LDD and a DB-15 TEC connector on the back of the mount, which allows for quick connections to any Arroyo Instruments controllers.

Specifications

    Supported Packages

5.6mm and 9mm TO-Can, 2, 3 & 4 pin
Flange/panel mount fiber pigtailed lasers

    Thermal Capacity

10W

At 0°C delta from ambient, 25°C ambient temperature

    Input connectors
        Laser Diode

DB-9, male

        Mount TEC

DB-15, male

    Temperature Control
        Temperature Range (°C)

-5 to +85

        Sensor Type

10kΩ Thermistor

        TE Module Imax (A)

5.6

        TE Module Vmax (V)

7.6 (at 25°C)

    Recommended Controller

5240 TECSource or 5305 TECSource

    General
        Size (H x W x D) [in(mm)]

3.0 (76.2) x 3.0 (76.2) x 2.91 (73.9)

        Post mounting holes

8-32 and M4